Carboy Drying Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple perforated cylindrical stand that allows a carboy to be set on it inverted, without the top of the carboy…
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 122
- Makes
- 0
- Views
- 793
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Simple perforated cylindrical stand that allows a carboy to be set on it inverted, without the top of the carboy touching the floor/sink. The perforations are intended to allow drying.
It is intended to be printed upside down, that way there are no overhangs greater than 45°.
I used ABS, with a 20% infill, and it seems sturdier than necessary.
Here's a timelapse video of the printing: https://youtu.be/p-Xx8uj7Xjc
Print instructions
Category: Food & Drink Summary
Simple perforated cylindrical stand that allows a carboy to be set on it inverted, without the top of the carboy touching the floor/sink. The perforations are intended to allow drying.
It is intended to be printed upside down, that way there are no overhangs greater than 45°.
I used ABS, with a 20% infill, and it seems sturdier than necessary.
Here's a timelapse video of the printing: https://youtu.be/p-Xx8uj7Xjc