1 / 1
David-Clark Headset Microphone
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the piece that goes in between the microphone and mounting arm on some older David-Clark aviation headsets.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
If you have a David Clark headset that the microphone is attached to the adjustment arm by a piece of plastic that the mic plug prongs go through instead of the mounting point being an integrated part of the mic, this is the piece you are looking for. You might have to make the mounting hole slightly larger and do some sanding to get it to fit and move freely.