PTFE tube holder for BLV enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds four PC4-M10 PTFE connectors.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 28
- Makes
- 0
- Views
- 225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Mounts in place of the top grommet.
You can screw in four PC4-M10 connectors, to allow pass-through of up to four strings of filament to the inside of the enclosure.
Assemble using a 10mm M3 bolt inserted from the top.
There's room for four dryboxes (https://www.printables.com/model/4683) on top of the enclosure. I used these together with the PTFE adapter (https://www.printables.com/model/31696) to complete my solution.
I'd also suggest using the TUSH spool holder (https://www.printables.com/model/329531) to reduce friction on the spools.
The models are written in solidpython (the files with extension stl.py), which compiles to openscad format (the files with extension .scad), which is then rendered to stl.
