1 / 1
Voron V2 / Trident Umbilical Exhaust Mount PG7
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Umbilical mount that acts as a cover for the orignal exhaust back cover Takes a PG7 cable gland for better strain relief
- Rating
- 5 / 5
- Likes
- 69
- Downloads
- 399
- Makes
- 2
- Views
- 6,154
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
CAN Umbilical mount that acts as a cover for the exhaust.
Swap with the original exhaust back cover.
I've added 1.75mm ABS filament (twice the length of the umbilical cord, folded in half and fused the ends together with a lighter) for better stiffness
STEP file included.
If you want to add a passthrough for your bowden from the back, add ~ Ø4.2mm hole 21.6mm from the center.
Version with heat-set inserts was not tested. I secured mine with M3 nuts on the back
Print in default Voron ABS settings