Sony Gold Wireless Headset cushion holders
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement cushion holders for GWH headphones, including side designating plugs.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 103
- Makes
- 0
- Views
- 514
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
Geometrically and dimensionally accurate model of the original part, so it can be used with the original headband if needed. I decided for this approach instead of altering the design to make it more FDM friendly.
Parts are not mechanically strained but require decent accuracy, so PLA is your material of choice here.
There are also those tiny plugs covering the screw head but expect you're going to need 0.25 nozzle, good filament and push your printer to the limits to print them successfully. The best idea would be to print them on SLA printer (resin), if you have it available.
If you need this particular part, there is a high probability you also need the headband itself:
Sony Gold Wireless Headset Headband v2 by Ren | Download free STL model | Printables.com
Example is printed with Prusament PLA Royal Blue blend, which is close in color to the original tone but contains slight sparkling effect.