Christmas xmas bulb and base for tealight
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
bulb can print with multiple layers. base is easier to screw on and raises tealight up for maximum illumination
- Rating
- 4 / 5
- Likes
- 47
- Downloads
- 146
- Makes
- 3
- Views
- 703
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
12.27.24 update – replaced the modified base with a fresh stl base.
12/10/22 update: added remixed base that is easier to screw/unscrew and moves the led up as much as possible. Also included amazon links for the ones i purchased.
- screw on bottom cap is now external. this allows for much easier on/off.
- cap has an interior lip that will make the tealight flush with the top opening. I tested this out on 4x different tealights and it works for all.
- the base is made up of modifier parts and negative volumes. You can adjust the height of the riser if your tealight is a different height.
- The height of the base on MY tealights are 15.5mm and 16.5mm tall. I am fine with the slight movement on the one that is 15.5mm tall.
bulb
I planned to give these away as gifts and wanted multiple walls to increase durability. The led cutout on the original file would print as a solid surface when using more than 1 wall.
- i use 3x walls with a 0.4mm nozzle, using petg or pla.
There is a small cylinder modifier in this 3mf file. This allows you to print multiple walls while retaining that cutout.
links to tealights. all are 1.4" in diameter.
These 3 have timers. They will stay on for 6 hours, then turn off for 18x. These are a nice set it and forget it solution. They do cost more than the standard on off variants.
This last one is a rgb that fades between colors. This does NOT have a timer.