Simple Japanese Pagoda
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
šÆšµ Simple & very easy to print model of a Japanese pagoda, no supports needed. Multi part assembly.
- Rating
- 5 / 5
- Likes
- 187
- Downloads
- 862
- Makes
- 5
- Views
- 5,020
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Architecture & Urbanism
- License
- Creative Commons ā Attribution ā Noncommercial ā NoDerivatives
šÆšµ ę„ę¬ćøćććć!
Welcome to Japan!
This was modeled by Dany SƔnchez.
This easy 3D print represents a typical Japanese 5-story pagoda used to store several buddhist relics, similar to the ones seen in the HÅkan-ji Temple inĀ KyÅto, or the SensÅ-ji Temple in Asakusa, Tokyo.
This is a simple version, made in Tinkercad several years ago. it's very easy to print without supports or hassle.
You can download a more complex, ultra-detailed version here.
About Japanese Pagodas
Japanese pagodas are very similar toĀ Chinese, Vietnamese, and Korean ones in style, theĀ Chinese being the historical inspiration and model for all others, and in turn,Ā is a reinterpretation of the Indian stupa.
Kyoto'sĀ Yasaka-no-to Pagoda is a 15th-century addition to a 6th-century temple complex known as HÅkan-ji Temple. It is a popular tourist attraction of the city, and one of its most photographed landmarks (from Wikipedia).
MiniWorld3DĀ is happy to bring thisĀ historicalĀ model to life as a homage to all the people of Japan. This model was created from scratch by hand and brain inĀ parametric software to ensure printability, using photographs and blueprints to create a beautiful and stylized version of your favorite landmarks. Ā Please give credit, it's all about spreading culture!Ā
Consider supporting us on Patreon!
Find all our profiles, YouTube channel & social media on:
JoinĀ our 40K followers on IG!
MiniWorld 3DĀ is a collective of 50+ artists creatingĀ theĀ best library ofĀ 3D printable models of landmarks of the world!
Photo credits: Ā Dany SĆ”nchez & MHJ Ā .
-----------
Printing Tips
Suggested parameters:
For better details, print slow, such as 15 or 20mm/s for outer perimeters.
Fine-tune retraction to avoid stringing.
Perimeters: 2
Top layers: 3
Infill: as low as 12%
No supports needed.Ā
Each floor is numbered to ease correct assembly. Each floor is slightly smaller than the previous one, for a tapered effect.
Use glue for a permanent assembly.
Color printing is possible with a regular setup (without MMU) if printing floors 1 to 4 at once using the pause-and-change filament method from black to red mid print. The same can be done for the top spire alone, changing from black to gold.