CR touch Zero Offset probe backplate mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For Ender 3 S1. Offset X=-47mm, Y=0mm
- Rating
- 4.862 / 5
- Likes
- 222
- Downloads
- 1,542
- Makes
- 31
- Views
- 8,878
- Reviews
- 29
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This Creality Sprite Extruder backplate relocates the CR Touch probe to X=-47mm, Y=0mm. This allows the bed mesh to be more accurate along the Y axis because the hotend lines up exactly with the probe (useful if the Y extrusion is warped). It also allows for more area of the bed to be probed.
Heatbreak fan cover included for better ergonomics when loading/unloading filament.
This part is designed to require no re-wiring or additional hardware.
Print settings for PLA:
.2mm layers
3 perimeters
4 top/bottom layers
10% infill
No supports for V1 and V2, Supports needed for V3
40-60 mm/s speed
Note: I printed with PLA and it has held up well for printing PLA, ASA, and PETG.
V2 edit:
Increased clearance on right side mounting tab by .3mm to allow for larger printing tolerances.
V3 edit:
Increased probe mounting height by 1mm for more clearance.
Added PTFE filament tube holder for printing from drybox.
Weight-reduction modifications and some aesthetic changes.