Prusa Mini First Layer and Bed Shape Test
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.08 – €0.09 net (excluding VAT)
For file: prusa-mini-180x180mm-bed-test-v2_0.2mm_PLA_MINI_5m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.09 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 5.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is the low-cost, fast-to-print first layer and axis boundary test.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 156
- Makes
- 2
- Views
- 450
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
This is the low-cost, fast-to-print first layer and axis boundary test. You can use that design while trying to square your Prusa Mini.
When the print is done check these things:
- Is your print inside (or nearly inside) the print bed lines?
- Is your print parallel to the lines on the bed?
- Is your first layer seem ok?
Some overflow is acceptable (approx =<1mm). Be sure your print head doesn't hit the two screws used for the magnetic print bed.
Print settings:
- Layer height: 0.2mm
- Infill: Not important
- Solid Layers: Not important
- Skirt > Loops: 0 (important)
- Brim > Brim Type: No brim (important)
Related articles:
https://help.prusa3d.com/article/first-layer-calibration-mini-mini_229122
https://help.prusa3d.com/article/squaring-your-mini_158518