1 / 8
RGB Beer Stubbie Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Make your beer party!
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 38
- Makes
- 0
- Views
- 809
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Costume Accessories
- License
- Creative Commons — Attribution — Noncommercial
Beer stubbie holder with addressable LEDs! Perfect for a music festival.
Designed to fit an Australian Beer cans (66.1mm diameter), for a standard height of the 330ml can. 375ml and 500ml will also fit. Should fit another cans from around the world, but for a test you can slice the top 15mm of the can-holder.stl as a test print.
My Print Settings:
20% cubic infill
3 verticle shell
3 top/bottom layer
0.2mm Nozzle
Printed with eSun PLA+ White
Build List
- 6 M3x8 SHCS
- 6 M3 Nut Inserts - https://www.aliexpress.com/item/1005002288716120.html
- 45 LEDs (75cm of 60led/m addressable led strip IP65)
- D1 Mini
- 3000mah lipo battery - https://temperosystems.com.au/products/104167n-lithium-ion-polymer-battery-lipo-3-7v-3000mah/
- USB C Lipo Charger (6 hole version) - https://temperosystems.com.au/products/tp4056-type-c-usb-1a-5v-lithium-battery-charger/
- Mini Rocker Switch - https://temperosystems.com.au/products/kcd11-ac-250v-3a-2-pin-on-off-i-o-spst/
- 5v boost converter - https://www.amazon.com.au/dp/B0BBFXLXFZ
- Hot glue
- Double Sided Tape (to mount battery)
- Assorted lenghts of wire