Christmas Tree, with an optional custom display stand for freestanding use (Christmas ornament)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.13 – €0.16 net (excluding VAT)
For file: Snow Globe stand mini_0.2mm_PLA_MK3S_12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.15 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 11.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Print it. Place it on the custom stand, or near a wall, or use adhesive tape to put it on the window. Enjoy! Ho ho ho!
- Rating
- 5 / 5
- Likes
- 40
- Downloads
- 291
- Makes
- 2
- Views
- 788
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial
https://www.buymeacoffee.com/maxt
----------------------
2mm thick
The model will fit on Prusa Mini+ (180x180)
Feel free to size it up or down as you wish
I strongly suggest sizing it up to fit your entire heat bed as it gives the best result
The best quality is achieved if printed face down
Print: 0.2mm
Nozzle: 0.4mm
Perimeters: 2
Support: Not needed
Brim: Not needed
Infill: 10% (lots of bridging)
Fill pattern: Support Cubic
Solid layers, top: 2
Solid layers, bottom: 2
Minimum shell thickness, top: 0.4mm
Minimum shell bottom, top: 0.4mm
Seam position: Rear
These settings will save you at least 40% of the filament, and it will produce the same quality print.
A tip: If you want to get this print easily off your heat bed, place the heat bed with the printed model in the freezer for 10 to 30 mins. Take it out, and it should pop off quite easily without any breaks/cracks, as shown on the photo below :)
I've also included a custom stand to fit the Snow Globe :)
The mini version of the stand should be used only if the model can be placed somewhere without too much disturbance (maybe even behind a glass).
Otherwise use the normal version of the stand, it's pretty sturdy.
I've also included an alternative stand - see model “Alternative stand.stl”. It's also made to fit this model :)
Infill: 10%
Happy Printing!
--------------