Toyota logo covers for 15" hubcaps by Jestic, model Delta Black
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Toyota logo covers for 15" hubcaps by Jestic, model Delta Black
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 25
- Makes
- 0
- Views
- 428
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought 15" hubcaps without any car brand markings and decided to add Toyota logo emblems (photo 1).
I drew and printed the base of the logo from black PLA and silver PLA (logo) with 30% infill and ironing of the last layer - diameter 63mm (photo 2). Then I printed a template for drilling holes in the cap (photo 3) and drilled the holes (photo 4). Originally, there were supposed to be 5 holes, but I found that 3 would be enough.
In the next step, I printed the pins, which I glued to the base of the logo from the cap side (photo 5). After printing I found the base a little too thin and added 1mm to the base thickness of the logo for better stability. Then I smeared both parts with glue and glued them together. In the last stage, I heated the screw mounted in the screwdriver with a burner and melted a few mm of pins from the inside of the cap (photos 6 and 7). This is the end result, I am satisfied (photo 8).