1 / 2
Double Suspension Bridge for Wooden Train Tracks
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Golden Gate Bridge-inspired, compatible with IKEA Lillabo / Brio tracks
- Rating
- 5 / 5
- Likes
- 130
- Downloads
- 526
- Makes
- 8
- Views
- 3,107
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
v1.1 Added extra tabs to support more tracks lengths and positions.
v1.0 Added a spacer to keep the bridges the right distance apart for easier playtime.
Fun project with the kids. I also included long and ascending tracks if you need to print more (IKEA compatible).
Bridge is designed to fit MK3S+ or Ender 3 beds at 230 x 190 mm or angled at 223 x 223 mm.
Parts
- 4 x Bridge Panels
- 10 x Beams
- 20 x M4 bolts (12 - 20 mm length)
- 2 long tracks (240mm)
- 2 ascending tracks
Print instructions:
- Bridge Panel:
- Direction: lay flat
- Layer height: 2+ mm
- Infill: 15 %
- Support: No
- Enable Brim if possible to prevent warping
- Beam:
- Direction: standing
- Layer height: 2+ mm
- Walls: 3+, enough to require no infill
- Support: No
* Tested only with IKEA Lillabo tracks.