Christmas Hernhutter Star - Ø 44 cm
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.97 – €1.18 net (excluding VAT)
For file: E14 Mutter für M28 Außengewinde / m28mutter_02mm_petg_mk3s_1h3m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.08 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 1.05 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Illuminated model of the Hernhutter Christmas Star.
- Rating
- 5 / 5
- Likes
- 66
- Downloads
- 326
- Makes
- 2
- Views
- 1,702
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
HISTORY HERNHUTTERS
The Hernhutters were brothers who originally (anno 1722) came from the former Czechoslovakia, but were persecuted there, fled and ended up in Hernhut in Germany. In that town they built a settlement that has grown into an Evangelical Brethren community.
Today there are several brethren communities throughout Europe, Africa, South-America and the Caribian, totalling to 1 million members.
MODEL
No glueing of plastic parts.
The frame halves click together by small magnets.
For easy storage the Christmas Star can be disassembled.
Diameter assembled: 44 cm (17 inches)
Weight: 0.36 kg.
PRINTING
Nozzle 0.4 mm.
The Star Rays are printed in Vase Mode:
Layer height 0.28 mm - 4 bottom layers - flow ratio 1.2 or line width 0.8 mm.
I printed the frame with PLA, layer height 0.2 mm.
ASSEMBLY
For orientation please have a look at 3D-VIEW.stl.
- Glue (for instance Pattex Ultra Gel) 8 magnets Ø5 x 3 mm in the Frame Top.
- Glue 8 magnets in the Frame Bottom. Watch out for the correct polarity.
- All Star Rays are pressed and clicked from the insides of the Frame Bottom and Frame Top.
- Assemble the E14 or E27 lamp fitting (with electricity cord) in the Fitting Holder
- Use a LED bulb.
- Press and click the Fitting Holder (with fitting and bulb installed) in the Frame Top.
- Join the Frame halves, the magnets will hold them together.
M E R R Y C H R I S T M A S