Magnetic Filament Filter
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.55 – €0.67 net (excluding VAT)
For file: all-parts_0.2mm_PETG_MINI_40m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.61 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 39.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Practical to use a filament dust filter.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 88
- Makes
- 1
- Views
- 686
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
I used a total of 8 pieces of 5x1.5mm neodymium magnets. 4 pieces is enough if you put these on cross corners. As a sponge, I used a dish sponge. You can use the rectangular small piece as a reference object to cut the sponge for the correct size.