1 / 1
Santa Sleigh in a bauble (Christmas tree ornament) — image 1

Santa Sleigh in a bauble (Christmas tree ornament)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Print it. Hang it on the Xmas tree. Enjoy! Ho ho ho!

Rating
4.759 / 5
Likes
435
Downloads
3,018
Makes
36
Views
5,401
Reviews
29

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

https://www.buymeacoffee.com/maxt

----------------------

2mm thick

The best quality is achieved if printed face down

Print: 0.2mm
Nozzle: 0.4mm
Support: Not needed
Brim: Not needed
Infill: Not needed, but I'd suggest going with 100% to ensure sturdiness

A tip: If you want to get this print easily off your heat bed, place the heat bed with the printed model in the freezer for 10 to 30 mins. Take it out, and it should pop off quite easily without any breaks/cracks, as shown on the photo below :)


 

Happy Printing!

--------------

https://www.buymeacoffee.com/maxt