1 / 4
Ergohuman Chair seat tilt mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enable seat tilt in ergohuman chairs
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 19
- Makes
- 0
- Views
- 443
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Seat tilt for Ergohuman Chair
My seat originally was vary uncomfortable - under the knees is hard edge which cuts off bloodstream to lower parts of legs so I decided add extra functionality.
1,5cm between each steps (and 0,5cm for the very first one).
Print with PETG for good durability.
About 30% infill is enough for person ~70kg.
0.25mm layer height.
There is only one place where supports during print is needed, central square hole in the main part.
For blockade between steps I am using a hex key (H5)