1 / 2
Calibration Cube
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Calibration Cube packed with features
- Rating
- 4.906 / 5
- Likes
- 178
- Downloads
- 5,316
- Makes
- 45
- Views
- 10,081
- Reviews
- 32
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
I designed the cube in the attempt to make a calibration cube gave gave much more information about your setting than just directions. Here's a run down of all the test it has in it
- Labeled Dimensions to see how your printer/slicer is warping the length of sides
- Text at the bottom so you can see if your nozzle is to high or low
- Labeling Text is 1mm deep and allow for you to see how your printer handles small bridging as well as if it making the text to deep or shallow
- Hollowed out core to show if your printer is having string, drooping, or overhang issues
- 14mm hole so you can see how much your printer over sizes or under sizes holes
- A stair stepping test that is meant to show how aperient stair stepping will be on future prints with current setting
I hope this will help some people tune their printer better and faster than other tests, enjoy:)