Try Square
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.05 – €1.28 net (excluding VAT)
For file: Try Square 100x50_0.2mm_PLA_MK3S_1h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.16 excluding VAT (range midpoint).
- Weight reported by the author
- 14 g
- Print time reported by the author
- 1.19 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
If you need to measure a right angle...
- Rating
- 4.778 / 5
- Likes
- 27
- Downloads
- 290
- Makes
- 8
- Views
- 1,297
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
You know it, you need to accurately measure the right angle and you have nothing. No problem, ten minutes in the modeling program, an hour and a quarter of printing, and the problem is over.
Dimensions: 100x50x20 mm.
If you want to edit the model, you can find the STEP file in the attachment, or you can edit the model directly in OnShape at the link below.
Note:
Please don't forget to leave a rating or a comment. Feedback is important for me. Thank you very much.