1 / 2
Ender 3 V2 Quiet Fan Shroud/Cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Upgraded hotend fan for extra quiet performance
- Rating
- 4 / 5
- Likes
- 54
- Downloads
- 244
- Makes
- 1
- Views
- 2,473
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Much quieter, good airflow, easy to remove.
Instructions:
- Buy four Orion OD4010-24LB 24V fans.
- Use one to replace the fan in your electronics housing
- Print this file. Orient it like the photo attached and use Cura's tree supports touching buildplate only.
- Remove the original fan shroud, and clip the fan wires.
- Solder one fan to the wires that went to the heatsink fan.
- Solder two fans (in parallel) to the wires that went to the old blower fan
- Make sure to use heatshrink or electrical tape over each wire splice.
- Slide the heatsink fan through the new shroud from the inside, and then attach with 4 M4 screws
- Add the other two fans and attach with M4 screws
- Line up the groove on the back of the shroud with the plate, and then insert a M3 screw through the mount hole. An M3 bolt will catch the screw from the front
Enjoy a much quieter hotend!
Now you'll want a quieter PSU fan :)