1 / 3
Labory case inlay
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom inlays for Fabory case
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 1
- Views
- 172
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I had an old Labory case lying around (335mm x 235mm x 50mm)
I wanted to store my cable endcaps and crimping tool in there, so I made a few simple boxes to fit in there. I made to edges of the box a bit sloped at the top, so you can easily take them out of the case.
Printed them in leftover filament (ASA and PETG). but should also print fine in PLA.
the boxes are all 48 mm high and have the following dimensions:
180 x 75 mm (to hold crimping tool)
55 x 75 mm (goes above crimping tool)
65 x 78 mm (case will fit 3 above each other)
65 x 117 mm (case will fit 2 above each other)