Functional Rubiks Cube. No supports!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is a fully functional cube that does not require support material to print.
- Rating
- 4.417 / 5
- Likes
- 131
- Downloads
- 1,140
- Makes
- 11
- Views
- 5,620
- Reviews
- 12
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- GNU General Public License v2.0
This model is a fully functional cube that does not require support material to print.
The files are in the recommended printing orientation to avoid supports.
You can print all the parts in PLA, but it is recommended to print the clip in a stronger material like PETG when possible.
Recommended print settings:
- Wall thickness: 1.2mm
- Solid layers (top and bottom): 3
- Infill: 10%
- Supports: Off
| Part | Quantity | Material | Infill | Supports |
| CORE | 1 | PLA | 10% | Off |
| mid_face | 6 | PLA | 10% | Off |
| side_face | 12 | PLA | 10% | Off |
| corner_face | 8 | PLA | 10% | Off |
| clip | 6 | PETG | 0% | Off |
Assembly instructions
Step 1:
Insert the clip piece into the mid_face piece.
Repeat for all 6 mid_face pieces.
Step 2:
Press the CORE piece into one of the assemblies made in Step 1.
Step 3:
Place 4 side_face pieces over the assembly (see figure).
Step 4:
Place 4 corner_face pieces over the assembly (see figure).
Step 5:
Press 4 mid_face assemblies made in Step 1 into the core piece (see figure).
Step 6:
Place 4 side_face pieces over the assembly (see figure).
Step 7:
Place 4 corner_face pieces over the assembly (see figure).
Step 8:
Place 4 side_face pieces over the assembly (see figure).
Step 9:
Press a final mid_face assembly into the remaining hole on the CORE piece.
The Cube is now assembled.