1 / 3
Sunlu Filadryer front filament guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sunlu Filadryer Front plug/feed.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 45
- Makes
- 1
- Views
- 463
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Sunlu Filadryer Front plug/feed.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Yes
Resolution:
0.12
Infill:
100%
Filament: 3d Solutech TPU translucent yellow
Notes:
I used TPU, with 2% supports that i cut out with a knife, Print Speed of 20mm/s. Both the fit on the unit and where you put the bowden tub are friction fit. This was designed for <2mm filament and was sized for a Capricorn bowden tubing. I used brim to help keep it in place.
With the slanted version you may need to you a raft. I used a raft and tree supports myself.Post-Printing
I used a knife to cut away the supports.
Category: 3D Printer Accessories