1 / 4
51mm Coffee Portafilter Wall Mount / Shelf
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
51mm Coffee Portafilter Wall Mount / Shelf. Made specifed for Delonghi EC680/685/885, or other 51mm portafilters
- Rating
- 4 / 5
- Likes
- 25
- Downloads
- 149
- Makes
- 1
- Views
- 936
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by the talented design by jootoole (https://www.thingiverse.com/thing:5214891).
Made specifed for Delonghi EC680/685/885, or other 51mm portafilters (not tested).
- 2 slots for portafilter. The 1st mount slot for stock portafilter is slightly wider than the 2nd slot.
- 2 slots for tamper/distributing tools that is 51mm in diameter
- a slot for needle distributing tool (18mm diameter)
- a slot for brush tool
The sizes are made out of tools of what I own.
There is another separate wall mount for the buskets, 3 slots in total.
Mounting method: specified slot for 15mm wide / 1mm thick double-sided tape
Print guide:
both printed vertically
- Main shelf: no support needed; 3-4 walls recommended; infill at your wish
- Busket shelf: support needed for the numbers; apply brims if needed