"Bolt-Tray" for Bondage Fiddle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
"Bolt-Tray" for my modified bolt for the "Modern Bondage fiddle"
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 73
- Makes
- 0
- Views
- 1,741
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The idea
This tray can be attached to my modified bolt:
https://www.printables.com/de/model/336631-modified-bolt-for-modern-self-bondage-fiddle
The idea was to be able to give the wearer of the fiddle a task like holding a drink or something else.
The model
Here it is in 2-parts as the bridging with the hole for the magnet in the center was not the best idea if you try to print it in one piece.
The fusion file is included and has some parameters for diameter and magnet size. Also the height of the outer “wall” can be varied.
The bottom part helps a lot keeping it in place on the modified bolt. I have included both bottom parts for the standard diameters of the locking bolt.
- BoltTray v7 - Bottom (for the bigger footer of the bolt)
- BoltTray v7 - Bottom for bolt top (for the smaller top - lock on top of the fiddle)
Of course if you want to make it more tricky you can leave the bottom part away, as the socket for the magnet is included in the top-part. The bottom part can be simply glued to the top.
Have fun and play safe :).
Printing
Printed with 0.4mm nozzle, 0.2mm layer height, 3 perimeters and 18% infill.