1 / 4
Lumen PnP reel holder for Ikea Trotten table
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a bracket to attach a threaded rod to the metal frame of a Trotten table for holding small reels.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 11
- Makes
- 0
- Views
- 420
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
The bracket wraps around an Ikea Trotten table metal frame. You need to locate the existing holes on the inside of the top frame beams, and drill a hole on the other side of the profile so that an M5 bolt can go through.
Requires:
- 2no M5x40 bolts
- 2no M5 nuts inserted into the brackets
- 3/8-16 threaded rod. Cut to size with dremel.
Print using PETG with no supports needed.
I used these as stoppers for each end of the rod:
https://www.printables.com/model/109221-wire-shelf-foot-1-tube-38-16-thread