Intex Ultra XTR Frame leg bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a bracket to hold some of my pool stuff to the frame and this is what I came up with.
- Rating
- 5 / 5
- Likes
- 65
- Downloads
- 376
- Makes
- 1
- Views
- 4,159
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a bracket to hold some of my pool stuff to the frame and this is what I came up with.
I also have the holder for the valves for the pump and such too.
It needs to be printed in PETG, ABS, or ASA (for UV protection)
I tested PLA and it got weak and warped in the sun.
It uses a 2.5" long 1/4" bolt and nut, I recommend a Stainless steel one. If you use stainless steel bolts please use anti seize on the bolts
You can also attach a 1.5" PVC pipe to the bracket and it it for the pool nets and etc if you want.
Print instructions
No need for rafts or support material.
I would recommend printing it with at least 3 on the perimeter.
and it works with the 0.6mm nozzle as well as 0.35 layer height if you want.