1 / 1
Kids nametag keychain
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
Printed as a gift for pupils in wife's class.
It might be useful for others if your kid's name match ;)
Print instructions:
- PLA 218C/60C
- 0.4mm nozzle
- 0.15-0.2mm layer
- 3 perimeters
- 5 top/bottom layers
- infill not needed (will be 100% anyway due to perimeters)
- print laying flat on the bottom surface (as in the attached picture - stls aren't properly aligned)