Soft guard for ratchet straps with claw buckle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This clips on to the ratchet-strap buckle to protect items from scratches. Bonus points if you plasti-dip the bottom.
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 74
- Makes
- 2
- Views
- 673
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
This clips on to the ratchet-strap buckle to protect items from scratches. Bonus points if you plasti-dip the bottom.
It is sized for this buckle:
https://www.amazon.ca/gp/product/B09C8P1F74
Approx. 39.5mm length for the rail/sides (not including the tabs), and 30mm wide
Installation Steps:
0. Optional: plasti-dip the bottom of the part
1. Put the end of your strap through the tunnel at the lower end of the part
2. Put the top of the buckle under the circular lip at the upper end of the part
3. Carefully flex the part along the flex channel until the central overhang ‘grabs’ the metal rail
4. Finish pulling the strap through the tunnel, you should be able to feel the metal tip under the strap lodge into the tunnel as well and produce a nice flat fit