project box cable coupler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a solution to put a cable, such as a usb cable, thru the wall of a project box enclouser. The files include a…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 22
- Makes
- 0
- Views
- 184
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is a solution to put a cable, such as a usb cable, thru the wall of a project box enclouser.
The files include a small sample wall, and the pieces that can be used on either side to secure the cable as it passes thru the box, without the need for screws.
to see an example of an enclosure that uses this, please visit https://www.thingiverse.com/thing:3885484
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
15
Filament:
Prusament PLA PLA
Notes:
you don't need to print the sample wall, it is only included as an example.
I used fusion 360 to build this, I have included the .f3d file which is parameter based allowing you to change the wall thickness, opening height and width, the diameter of the hole thru which the power cord passes.
I'm really just learning fusion 360 so the .f3d file is a bit of a mess. Regardless I've included it for those who might want to fiddle with the parameters. If anyone wants to clean it up to make it more professional, then you are welcome to do so.
Category: Other