1 / 3
Velcro Clip Anchor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits Velcro (Hook and Loop) up to 16.5 mm in width | Has a hole for drilling | Uses 2.92 g per Anchor at 15% Infill
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 85
- Makes
- 2
- Views
- 406
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Basic Info
- Uses 2.92 g per Anchor at 15% infill
- I've printed in both PLA and PETG both work fine.
Tips if planning to mount by screw
If planning to mount it with the screw, be careful when tightening it, I over did it with a drill and it cracked. Hand tightening with screwdriver is best as you can feel when resistance gets to much.
My preferred method of mounting with screw onto wood is pre-drilling then using screwdriver and hand screwing it in.
Remixed from Pavel Riedl's Velcro Clip
Differences
- Removed side bits (I believe they are for stability but I'm using without and they are pretty solid)
- Reduced Velcro width allowance from 20 mm to 16.5 mm
- Reduced Hexagon size by a bit to accommodate shrinkage.