Bambu X1 X1C BentoBox filter remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
BentoBox filter from thrutheframe remixed. 2 fans 60*20
- Rating
- 0 / 5
- Likes
- 87
- Downloads
- 298
- Makes
- 1
- Views
- 4,577
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
V1:
I wanted to use two 24V fans 60*20. I have restarted the design from scratch, improvements:
- Better aspiration with two 60*20 fans
- Better fit for HEPA filter
- Larger surface for carbon filtration
- No magnets required
Finally I have downsized the power supply to 12V, it works very well. I had the project to add a 24V heating element but after few tests I realized that it is not required. I had a slight warping with ABS and with the new filter in place there is no warping anymore (even on large part), probably due to a more homegeneous temperature in the chamber.
- Carbon filter tray requires a piece of tissue to secure carbon pellets
- Interface plate is screwed to the base with 4 screws of 2mm diam longer than 2.5mm
- HEPA filter used is the same than original design
- To be printed in ABS or PETG, no support required
- Power cable can be passed through the hole at the back left corner of the chamber (see pic)
Aesthetic improvements to come.
Edit: Hepa filter used is 80*40*15mm (3.15"L x 1.57"W x 0.59"H)
Amazon: https://www.amazon.com/gp/product/B0782T7L6P/ref=sw_img_1?smid=AZW0EW96QZC81&
Aliexpress: https://www.aliexpress.com/item/1005002687133564.html?spm=a2g0o.order_list.order_list_main.10.4c3b1802ZQoako