1 / 7
Brio and Ikea compatible track crossing
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Crossing for Wooden tracks of basic length (144mm)
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 70
- Makes
- 0
- Views
- 601
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Crossing for Wooden tracks of basic length (144mm)
Print Settings
Printer:
Trilab Deltix
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
16%-25%
Filament:
Prusa / Fillamentum Black - PCTG Ivory and red-PLA
Black (Prusa), ivory and red - Fillamentum
Notes:
Post-PrintingYou will need
6x M3x8 socket head screw
2x M3 (flat) nut
2.0x20
Drill 3.2mm
After the printing drill 3.2mm hole in the ramp inside slots for uprights. (It is designed this way to allow to print it without supports)
Fix the ramp to the track by two screws.
Category: Toy & Game Accessories