Antenna mount for ZOHD Drift
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Antenna mount for ZOHD Drift. The mount takes a pig-tail that comes with most VTX's and mounts it solid in the plane.…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 31
- Makes
- 0
- Views
- 286
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Antenna mount for ZOHD Drift.
The mount takes a pig-tail that comes with most VTX's and mounts it solid in the plane.
You need to cut a hole in the plane to fit the mount. The thin sheet will add some additional structure to the area to compensate for the removed foam.
The pigtail is screwed in to the mount and the mount is super glued in to the plane.
The mount does have internal support in the hole (bridge flow), but it is just one layer (0.15mm) and is easy to remove with a Exacto blade.
When the antenna is dismounted the connector sits below the surface to protect it during transport.
Print Settings
Printer:
Prusa Mini
Rafts:
Doesn't Matter
Supports:
No
Resolution:
Variable
Infill:
15
Filament:
any PLA
to taste
Category: R/C Vehicles