1 / 1
Buggy Phone Stand (Print-in-place, Retractable)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A retractable, print-in-place phone stand for the E3D Buggy.
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 47
- Makes
- 1
- Views
- 482
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
A retractable, print-in-place phone stand for the E3D Buggy. Changes the look slightly (and better in my opinion) and a revo on top!
Printability: Max overhang is 55 degrees, a well tuned printer should be able to print this in ABS.
2 tolerances are included - high and medium (slightly below 0.2mm and 0.4mm respectively).
Uses a sliding mechanism to extend the stand.
Print settings:
Perimeters: At least 3
Infill: At least 15%
Nozzle: 0.4 but should work with 0.6