1 / 4
Shaper Systainer Jig - 1/4" MDF Standoff for MFT Table Tops
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows using 1/4" MDF instead of 1/2" ply and 2x4 + shim to set up the Shaper Systainer jig once it has been cut.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 52
- Makes
- 0
- Views
- 1,311
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Allows using 1/4" MDF instead of 1/2" ply and 2x4 + shim to set up the Shaper Systainer jig once it has been cut. Works on any MFT-style table top with 20mm holes on 96mm centers. Pictured using a Bora Centipede. Print at least 4 of them for a stable top once the foam is inserted. Gluing to board after putting in table optional, but not required. I never did and nothing went wrong (even if the whole jig moves, it's all relative to itself, so cutting works fine.