Hanging Utensil Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hanging utensil holder. Holds 12 kitchen utensils. Overall height is 78mm (3 in) Longest width is 143mm (5.6 in) Base…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 178
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Hanging utensil holder. Holds 12 kitchen utensils.
Overall height is 78mm (3 in)
Longest width is 143mm (5.6 in)
Base is 102mm (4 in) square.
The holes came out a little undersized on my printer for the insert but are easily drilled. I ended up using a 9/64" drill bit.
Parts list: M3 threaded insert Ball Bearing (3mm X 8mm X 4mm)
M3x30 pan head screw
4x wood screws to mount.
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Rafts:
Yes
Supports:
Yes
Resolution:
0.16
Infill:
10%
Filament: FlashForge PLA Black
Notes:
I used a raft and supports on the hook spinner but only a brim on the down rod piece.
Category: Kitchen & Dining