Bücherwurm - Bookworm
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.21 – €0.26 net (excluding VAT)
For file: Buecherwurm_0.2mm_PETG_MK3S_14m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.23 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 14.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Schneller Druck - Lesezeichen / Fast pressure - Bookmarks
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 66
- Makes
- 1
- Views
- 396
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Gedruckt mit zwei Farbwechsel bei 1,0 mm und 1,4 mm
keine oberen und unteren Schichten
Schichthöhe 0,2 mm
Infill Geradlinig 40%.
Viel Spaß beim Drucken und Lesen.
-----------------------------------------------------------------------
Printed with two color changes at 1.0mm and 1.4mm
no upper and lower layers
Layer height 0.2 mm
Infill Straight 40%.
Happy printing and reading.