1 / 2
Car windshield wiper fluid hose joiner
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a joiner for a broken windshield wiper hose (5mm diameter) that fits VW and Audi cars (may fit other cars also).
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 307
- Makes
- 1
- Views
- 757
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
This model is meant to be printed on it's side with build plate supports at a 0.1 or similar layer height.
After printing use a small drill bit to clean the inside hole and also sand the outside surfaces to make the hose fit better. I recommend using some sealant on the outside surfaces of the joiner so it does not leak.
I printed this out of PETG to fix my broken windshield wiper fluid hose (as seen in the picture).