1 / 11
Protection for Jagg Oil Cooler System 10 row vertical fan assisted for Harley Davidson Dyna, Softail, Touring — image 1
1 / 11

Protection for Jagg Oil Cooler System 10 row vertical fan assisted for Harley Davidson Dyna, Softail, Touring

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Protection for Jagg Oil Cooler System 10 row vertical fan assisted for Harley Davidson Dyna, Softail, Touring

Rating
0 / 5
Likes
13
Downloads
81
Makes
0
Views
1,562
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

These parts are for a vertical 10 row Jagg oil cooler fan assisted for Harley Davidson. They fit for a cooler system for Dyna 91-17, 55-83 Big Twin, 82-94 FXR, 84-20 Softail, 84-16 FLT/Touring, 86-20 Sportster.

To protect the cooler from stones etc. I created a protection and some mounts so that it doesn't touch the cooler itself (for temperature and cooler damage reasons). There is a distance of 2-3mm between oil cooler and protection all around.

I printed the protection in Nylon PA12+CF15. The material is very shock-resistant and also temperatur resistant (>150°C). If you use other materials check the temperature properties. In my opinion material should be stable for a minimum of 110-120°C. So don't use PLA :-)

Files:

  • I have added some knobs depending on your printer settings and variations.
  • I have also added a 3mf file with the settings for PA12+CF15 (0,25 layer)

Annotation:
For the reason that it is a winter project, I haven't tested it yet based on the temperatures outside :-( . But I have created some other parts with that material for my bikes and the other parts work really well.

Tags