1 / 3
KP3S PRO Z axis endstop screw tweak
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is for Kingroon KP3S PRO without Y-axis linear guide upgrade.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 73
- Makes
- 0
- Views
- 839
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
The Kingroon Z homing screw was too long and I could not screw it in enough to have good first layer. Replace Kingroon screw with any M4 ISO 4762 Socket head screw. M4x16 should be best but beware - it was quite a challenge to get it screwed in against the spring preload.
V2 is a bit wider and with grooves for tightening.
The grooves in the inside diamter are meant for seam placement to dial the diameter more precisely. I pressed the cap onto a screw using toolshop vise.