3d printable Sieg x2 mini mill belt drive conversion

This is a belt drive conversion that can be almost completely 3d printed. My mill broke and I wanted to make a printable belt drive. It started out as only a temporary fix, but I've been using it for several months without problems.

This conversion doesn't have a spindle lock yet. I've been using an er20 collet and haven't needed the spindle lock. There is also no guard yet.

The Fusion 360 files have been included.

Hardware needed

2 2" long 1/4"-20 bolts

2 1/4"-20 nuts a wing nut can be used for the adjustable side

2 1/4" washsers

4 10mm long 6mm socket head cap screws

1.5x70 70 tooth timing belt https://littlemachineshop.com/products/product_view.php?ProductID=1105

The motor pulley can be printed or bought. https://littlemachineshop.com/products/product_view.php?ProductID=2261&category=

For the spindle lock

1 2" long 1/4"-20 bolt

1 1/4" shaft collar https://www.harborfreight.com/7-piece-drill-stop-set-38336.html

1 3/8" od spring

For the spindle lock

Cut the threads off of the 1/4" bolt. Slide the spring on the bolt and insert it through the front hole. Slide the shaft collar on from the other side. Push the bolt into the spindle hole. Then tighten the shaft collar's set screw.

Print Settings

Supports:

No

Infill:

Notes:

Print with 6 shells and 5 top and bottom layers.

Category: Machine Tools