Elster V200 Watermeter Sensor Inlay 18MM Sensor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Elster V200 Watermeter 18MM Sensor
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 176
- Makes
- 2
- Views
- 1,083
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple design to mount an inductive proximity sensor on your Elster V200 Watermeter.
The sensor used is a “M18 DC 5V NPN NO LJ18A3-4-Z/BX-5V 300mA” sensor working on 5 volt. It triggers on the little red wheel in your watermeter and will generate one pulse for every liter used.
You will also need a 10k pullup resistor as the sensor will pull the output low when proximity is detected).
I am using Homeassistant in combination with ESPHome to connect this sensor.
Check out
https://www.huizebruin.nl/home-assistant/esphome/watermeter-uitlezen-in-home-assistant-met-esphome/
For more instructions.