1 / 3
MK3s style X-Axis Motor Mount and Tensioner for MK2.5s (With Captive nuts for the end-stop) — image 1
1 / 3

MK3s style X-Axis Motor Mount and Tensioner for MK2.5s (With Captive nuts for the end-stop)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Basically the same model as KennyB but with 2x M2 nuts to help secure the end stop.

Rating
0 / 5
Likes
5
Downloads
53
Makes
0
Views
477
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Our printers are frequently pulled apart and the M2 bolt threading into plastic is a clear weak point on this design by Prusa. My solution is a few M2 Nuts. The nuts used were 4mm wide by 1.75mm tall (If you need it to fit a different size let me know and I will make some changes for you).

 

KennyB did a great job merging the Mk2 and the Mk3 motor mounts and all credit for this should go his way.

 

When you are slicing you will need to pause the print at 60.20mm to insert the M2 nuts and then resume the print.

Or you can use the attached gcode with a colour change at the right height.

Tags