1 / 1
Cover substitution for BK21-V27454-FCW on the inside of sliding door of a Ford Transit Custom — image 1

Cover substitution for BK21-V27454-FCW on the inside of sliding door of a Ford Transit Custom

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Self designed alternative cover substitution for BK21-V27454-FCW on the inside of sliding door of a Ford Transit Custom

Rating
5 / 5
Likes
4
Downloads
61
Makes
1
Views
1,106
Reviews
2

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

Self designed alternative cover substitution for BK21-V27454-FCW on the inside of sliding door of a Ford Transit Custom

Prequisites:
* Some welding glue (like UHU Plast Special)
* Some more bit elastic glue (like UHU Plus 2 Component Epoxyglue)
* holding hook from the original
* Self-adhesive rubber tape, size 6x3mm
 

Print setup:
* Printer: Prusa MK3S+ (incl. MMU2S)
* Nozzle: 0,40 mm
* Layer height: 0.20 mm (quality-variant/presetting  in Prusaslicer)
* Filament: PETG (ocean blue for cover, orange for the connection pin - Brand: Prusament)
* Infill: 100%
* Supports: yes (if object must be aligned diagonal due to the lack of space)
** I positioned some more support-"pillars" manually instead of for the whole cover
** also some on the upper side of the cover for the lower hooks as also for those on the sides
* Base temperature: 90C°
* Nozzle temperature:
** first layer 230C°
** then 250C° for the fast print (240C° if printed at 100% feed rate)
* 200% feed rate (with my printer setup it works sufficiently)
 

Post print:
* Calm on removing the supports from the cover and hooks ;)
* It is recommended to put some flexible glue on the back of the hooks for more stability (f.e. UHU Plus 2 Component Epoxyglue)
* Glue the connecting pin on the inner side of the cover (f.e. UHU Plast Special) to mount the holding hook from the original on it later
* Attach self-adhesive rubber tape (6x3mm) flush to the printed ring on the back of the lid
 

Comments:
* The hooks I reformated/modified multiple times (adding multiple parts to them) until they fit quite good. As a side effect of that they have some more “strange” vectors and you can see a bit unsmooth surface when zooming in. Either way that doesn't matter for the print, so I didn't retouch it anymore…sorry ;)
* The first attached gcode file version for the cover is configured with an infill of 15% (gyroid) what affects the hooks, but with the glue on the inner/back side as described it's strong enough, probably it has the desired elasticity cause of that fact, so I decided to add that one instead of one with 100% infill first. Later I added a version with 100% infill (but also with a feed rate of 200% from the second layer on)

Tags