dockin dfine+ 2 stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
angled stand for dockin dfine+ 2 bluetooth speaker. also improves the muffy sound when standing on the ground.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 20
- Makes
- 0
- Views
- 233
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Share Alike
dockin dfine+ 2 sounds great unless standing plain on the ground (=muffy sound). as soon as you raise the box angled, the sound becomes clear (since it directs more to the ears, obviously). notches in the back to apply rubber bands to keep speaker and stand together when carrying.
in quality mode it prints between 9 and 10 hours with 0.20 resolution and a 0.4 nozzle and 20% rectilinear infill.
no glue needed to connect the stands with the stabilizing bars (you still can glue it, if it does not hold tight).
remember to adjust the seam position to back (and rotate the model accordingly on the printing plate), if you want to have a cleaner look. also, ironing is not enabled in the gcode file, but would make the stand looking better - i used it for model in the pictures.
tinkercad source: https://www.tinkercad.com/things/000GpQp6XNx