1 / 3
Da Vinci t8 adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adapter to use a t8 lead screw on a Da Vinci printer. The printer will either need to be flashed with…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is an adapter to use a t8 lead screw on a Da Vinci printer. The printer will either need to be flashed with repetier firmware or have a new control board.
I used an anti backlash t8 nut.
After printing tap the 4 holes for the nut with a 3mm tap. Use 10mm long screws. Use a 8mm to 5mm flexible coupler.
Change the eeprom z steps per mm to 400.
Print Settings
Rafts:
No
Supports:
No
Infill:
100%
Category: 3D Printer Parts