1 / 4
Settlers of Catan Magnetic Base — image 1
1 / 4

Settlers of Catan Magnetic Base

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Another magnetic base inspired by all the remixes

Rating
5 / 5
Likes
19
Downloads
127
Makes
3
Views
1,402
Reviews
2

Updated at source:

Model information

Category
Board Games
License
Creative Commons — Attribution — Noncommercial

Inspired by the 3D Catan board by Dakanzla @ https://www.thingiverse.com/thing:2525047?fbclid=IwAR2PBeg0i4jX0EP-Hk1zYV997yUldjJ_imLfsVrO9ouTlrcakD_cRDQrUhI this is remix of this designer's magnetic base to accept cylindrical 3mm x 3mm magnets that I could find available on Amazon. 

The base is specifically designed to only accept the 3x3 magnets with a snap lock to hold them in place once pressed in. I also added a slot on the edges to accommodate the original wooden roads if you don't have the time to print the 3D versions. 

This model is completely re-drawn. Dimensionally, it will work with Dakanzla's pieces tiles and borders. The magnet locations are my own setup and will most likely not align with other remixes.

Printed with PLA, 0.4mm nozzle, 0.2mm layer height, 2 perimeters, 15% Grid infill, no supports.

You will need 12 magnets per base, 4 wood, 4 wool, 4 wheat, 3 brick, 3 ore, and 1 desert, for a total of 228 magnets. Use a small hex wrench to press the magnets into the holes, each side with opposing polarity, and same polarity orientation for all six (6) sides. 

Tags