1 / 2
Half Ring Ultrasonic Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a half ring for 5 ultrasonic sensors. Occupies 1" vertically. Very ugly CAD file - everything is hard coded,…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a half ring for 5 ultrasonic sensors. Occupies 1" vertically.
Very ugly CAD file - everything is hard coded, nothing is elegant. Uses standard HC-SR04 or similar.
(You might have to adjust sensor spacing on other models.)
By default, #8 bolts for mounting top and bottom rings together (holds the ultrasonics in), and 1/4" bolts for mounting to frame.
One of the modules I used inside is CC-A-NC-SA, hence the licensing.
Category: Robotics