Sailboat Mooring Chock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Snap-on toe rail line chock to keep lines from fraying
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 55
- Makes
- 0
- Views
- 668
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
My sailboat's mooring lines were getting frayed due to rubbing over the aluminum toe-rail, and I didn't care to install a standard deck chock as that would require drilling holes into the deck on the boat. This design snaps onto the toe-rail, and can slide back and forth to adjust to the correct angle for mooring at various slips and mooring floats. It is designed for 3/8" (10mm) mooring line.
I printed this in TPU and the flexability allows it to snap firmly onto the toe-rail, or be stepped on, etc. without breaking.
This is designed for a 1" (25mm) high toe-rail (top rail diameter 7mm, web thickness 4mm). I've tested it on a San Juan 24, J-24, C&C 30 and Olson 30.
Category: Sport & Outdoors